User's Manual

PMAC Dual-Ported RAM User Manual
32 Dual-Ported RAM Automatic Functions
Command Type = 1
Code 1 Code 2 PMAC Command
30 0/1 ENABLE / DISABLE PLC
30 0/1/2 ABS / INC / FRAX
30 3 HOME
30 4 Not Available
30 5 Not Available
30 6 HOMEZ
30 0 CIRn
30 1 LINEAR
30 2 NORM
30 3 PSET
30 4 SPLINEn
30 5 STOP
30 6 BSTART
30 7 BSTOP
30 8 WAIT (Not Implemented)
30 9 RAPID
30 10 CCn
30 11 TSELn
30 12 ADISn
30 13 AROTn
30 14 IDISn
30 15 IROTn
30 16 TINIT
Command Type = 2
Code 1 Code 2 PMAC Command
14 0 In={constant} (n = 0 to 1023)
14 1 Mn={constant} (n = 0 to 1023)
14 2 Pn={constant} (n = 0 to 1023)
14 3 Qn={constant} (n = 0 to 1023)
15 0 Mn|={constant} (n = 0 to 1023)
15 1 Mn&={constant} (n = 0 to 1023)
15 2 Mn^={constant} (n = 0 to 1023)
15 3 Mn=={constant} (n = 0 to 1023)
Internal PMAC 48-Bit Command Format
This section details the internal structure of the permitted binary commands. It is for reference for those
designing their own subroutines to create these commands. Contact the Delta Tau factory for pre-written
subroutines that create these commands.