User's Manual

PMAC2 PCI Lite Hardware Reference Manual – Preliminary Documentation

PMAC2 PCI Lite Jumper Descriptions 17

E111-118: Command Output Disable State

E Point and

Physical Layout

Location Description Default

E111

E112

E113

E114

E115

E116

E117

E118

Jump pin 1 to 2 of E11n for digital servo command

output signals of Channel n to tri-state when amplifier-

enable signal for Channel n is in disable state.

Remove jumper for digital servo command output

signals of Channel n to remain active (but typically

with zero command value) when amplifier-enable

signal for Channel n is in disable state.

No jumper installed