Reference Manual

PMAC Mini PCI Hardware Reference Manual
24 E-Point Jumper Descriptions
E49: Serial Communications Parity Control
E-Point and
Physical Layout
Location Description Default
E49
E2
Jump pin 1 to 2 for no serial parity; remove jumper for
odd serial parity.
Jumper installed
E50: EAROM Save Enable/Disable
E-Point and
Physical Layout
Location Description Default
E50
E2
Jump pin 1 to 2 to enable save to EAROM or flash
memory; remove jumper to disable save to EAROM or
flash memory.
Jumper installed
E51: Normal/Re-Initializing Power-Up
E-Point and
Physical Layout
Location Description Default
E51
E2
Jump pin 1 to 2 to re-initialize on power-up/reset;
remove jumper for normal power-up/reset.
No jumper
installed