User's Manual

Geo MACRO Drive User and Reference Manual
Software Setup 59
connected and powered up. Then if it is the first time he tries to setup his system, its advisable to click on
the Setup Ring Controller and Click Yes on the pop-up window to do a global re-initialization of the
Turbo PMAC controller.
If the user wants just to do some change of values, troubleshooting or setup some new MACRO Stations
then he should just press the No in the above window or not even press on the Setup Ring Controller and
press on Detect MACRO Ring button. If the user wants to reinitialize every I-variable on the Turbo
PMAC will be set back to factory default.
Note
If by accident or error the user pressed the Yes button on the reinitialize of the
controller, and he wants to reverse, then he needs issue a reset “$$$” or a couple of
seconds powercycle. This will load the last saved I-variables before the re
initialization.
Do NOT issue a save after the re-initialize if you want to reverse; if Save is issued
then there is no way to reverse unless the user restores with a backup file.
If the user chooses to Detect MACRO Ring, the program will automatically show how many Stations
were detected.