User's Manual

Geo MACRO Drive User Manual
56 Software Setup
Bits 20-23 specify the master number (0-15) for the Geo MACRO Station. At power-up/reset, these bits
get the value set by SW2. The number must be specified whether the card is a master station or a slave
station.
Bit
Hex ($) 000
000
Slave node Enables
Sync node
A
ddress
Master
A
ddress (0-15)
(0-15)
After setting the correct value to the MI996, click the Next button to move on.
The Setup software will come up with a new pop-up window asking if it is a Geo MACRO drive. You
should reply by clicking the Yes button.