User's Manual

Geo MACRO Drive User Manual
52 Software Setup
Then the first step is to select the kind of communications you have established with your PMAC device
that would be used as your Controller.
• UMAC and QMAC controllers can communicate to the PC via Serial Port, USB and Ethernet
• Turbo PMAC2 Ultralite controllers have two versions: the older ISA Bus and the newer PCI bus
o The ISA boards
can communicate to the PC via Serial Port and ISA Bus (manual
registration).
o The PCI boards
can communicate to the PC via Serial Port and PCI Bus. (Plug and
Play)
If there are no Devices on the list, then the user needs to Insert new devices.
For more information and details about the Communication of the devices, please read the appropriate
manual:
• PEWIN32 PRO
http://www.deltatau.com/fmenu/PEWIN32%20PRO.PDF
• PEWIN32 PRO Suite 2
http://www.deltatau.com/fmenu/PEWIN%2032%20PRO%202%20SOFTWARE.PDF
After you select the communications scheme, double click on the Test button and if everything is set
correct then a pop-up window will show saying that “the PMAC was successfully founded”. Press ok and
the Turbo Setup Application starts.