Installation manual

GEO Direct PWM Amplifiers – Preliminary Documentation
12 Unpacking
Recommended Fusing
Model Recommended Fuse
(FRN/LPN)
Recommended Wire Gauge*
GxL012x 20 12 AWG
GxL032x 25 10 AWG
GxL052x 20 12 AWG
GxL101x 20 12 AWG
GxL151x 25 10 AWG
GxH012x 10 14 AWG
GxH032x 15 12 AWG
GxH052x 20 12 AWG
GxH101x 20 12 AWG
GxH151x 25 10 AWG
* See local and national code requirements
Mating Connector Kits
Connector Kit Description
CONKIT1A
Mating Connector Kit for drives up to 5 amp continuous rating (Gxx012,
Gxx032, Gxx052): Includes Molex Connectors kits for 2 motors, AC input
connections, and 24V power connections. Requires Molex Crimp Tools for
proper installation.
Molex Part #
63811-1500 for AC Input
63811-0400 for the Motor Output, 24V input
CONKIT1B
Includes Molex mating connectors pre-crimped for dual axis drives up to 5
amp continuous rated (Gxx012, Gxx032, Gxx052). The AC input and 24V
have 3 ft. wires. The Motor connectors have 10 ft. shielded cable with
exterminated end for motor connections.
CONKIT2A
Mating Connector Kit for drives up to 15 amp continuous rating (Gxx101,
Gxx151): Includes Molex Connectors kits for 1 motor, AC input connections,
and 24V power connections. Requires Molex Crimp Tools for proper
installation.
Molex Part #
63811-1500 for AC input
63811-0400 for the motor output, 24V input, and Shunt Resistor
CONKIT1B
Includes Molex mating connectors pre-crimped for dual axis drives up to 15
amp continuous rated (Gxx101, Gxx151). The AC Input and 24V have 3 ft.
wires. The Motor connector has 10 ft. shielded cable with exterminated end for
motor connections.
Note
Due to the variety, variations, and wide availability of D-type connectors and back
shells, they are not provided in the connector kit.