Technical data

t [phone] e [e-mail] w www.mwatechnology.com t [phone] e [e-mail] w www.mwatechnology.com
66 67
Hydrostatic contents level gauges available:-
l100mm dial hydrostatic oil contents level gauge wall mounting
l160mm dial hydrostatic oil contents level gauge wall mounting
l250mm dial hydrostatic oil contents level gauge wall mounting
l100mm dial hydrostatic oil contents level gauge ush panel mounting
l160mm dial hydrostatic oil contents level gauge ush panel mounting
Hydrostatic tank level sensors available:-
lExternal hydrostatic tank sensor
lInternal hydrostatic tank sensor
lHygienic hydrostatic tank sensor
Transmitter and repeater gauges:-
l100mm dial oil level gauge wall mounting
l160mm dial oil level gauge wall mounting
l100mm dial oil level gauge ush panel mounting
l160mm dial oil level gauge ush panel mounting
Level relays
lSingle level relay
lTwo level relay
lTwo level relay with latching relay
lSingle level relay with test buttons
lTwo level relay with test buttons
HYDROSTATIC CONTENTS LEVEL GAUGES
MWA Technology hydrostatic contents level gauges are manufactured from stainless steel and are of the highest
quality. Each hydrostatic contents level gauge is manufactured and calibrated to each individual oil storage tank
to ensure the system can maintain high accuracy and a long service life. The standard system will comprise of three
components, the hydrostatic tank sensor, capillary tube and the hydrostatic contents level gauge. Relays and
switches are available to fully integrate with BMS systems.
Ultrasonic and Capacitance equipment is available upon request, please contact our technical support team.
OIL FILL & LEVEL SYSTEMS FIRE FIGHTING
DRY RISER CABINET SPECIFICATIONS
Cabinet & Door 16swg Zintec Steel.
Colour As Standard Red Ral 3002.
Architrave 30mm Wide All Round.
Glass 6mm Georgian Wired, PRV Lettering.
Lock Yale Slam Lock Keyed Alike.
Hinge Stainless Steel Piano Hinge.
Conforms To BS 5041 Part 5
DRY RISER
An inlet breeching at ground level provides the connection to the water supply of the dry riser system. The dry riser
system is normally dry and is charged by the re brigade in an emergency. Breeching inlets to the dry riser have either
2 or 4 inlet connections complete with 2.5" male instantaneous inlets to BS336 tted with non-return valves and with a
1" drain valve.
l100mm (4") dry rising main uses a 2- way inlet breeching in a vertical or horizontal position.
l150mm (6") dry rising main uses a 4-Way inlet breeching.
lDry riser equipment complies with the requirements of BS 5041 Part 3.
lThe Breechings are normally housed in dry riser inlet cabinets, normally recessed into the external wall of the
building and the outlet valves are housed in dry riser outlet cabinets on every oor of the building.
lDry riser landing valves are available with bsp or PN16 connections
FOAM INLET CABINETS AND ADAPTORS
Cabinet Specications:
Cabinet and Door 16swg Zintec Steel.
Colour As Standard Red Ral 3002.
Architrave 30mm Wide All Round.
Glass 6mm Georgian Wired, PRV Lettering.
Lock Yale Slam Lock Keyed Alike.
Hinge Stainless Steel Piano Hinge.
Conforms To BS 5041 Part 5
Options:
Full cabinet manufactured from 16swg zintec steel polyester powder coated to your colour specications.
Available in full stainless steel all front faces satin polished nish.