Technical data

t [phone] e [e-mail] w www.mwatechnology.com t [phone] e [e-mail] w www.mwatechnology.com
60 61
EGIP - 1E GAS PROVING & ELECTRICAL ISOLATION SYSTEM
The intelligas EGIP gas proving system is easy to install, with a straight forward tri-colour LED display. All interlock
wiring is a safe but detectable 24vdc, this makes future service or extension work safer and easier to perform.
KEY FEATURES
l Complete Corgi technical bulletin 130 compliant,
key switch start and BS6173 compliant.
l Adjustable purge and prove time (purge 5s/10s and
prove 30s / 60s).
l Automatic detection of downstream leaks and open
gas valves to prevent dangerous gas leak situations.
l System automatically purges and proves the gas
line for integrity, and gas is only made available
when full prove is carried out.
l System provides control of electrical systems such
as bench sockets via an emergency stop interfaced
keyswitch on the panel fascia.
l System only uses a main gas solenoid valve (not
included) so no need for an unsightly proving valve
and bulky arrangement.
l Compliance with CORGI’s TB130 and BS6173 - the
system needs the manger’s keyswitch to start and
low gas pressure monitoring, even after start-up.
l Low voltage: sensor outputs and interlocks are all
24v, electrically isolated supply, safer wiring and
safer for service personnel.
KEY FEATURES
l Full system status indication
l Easy wipe clean fascia
l Fire alarm interlock
l 2 year guarantee
l Simple, effective entry level gas proving system
l Supplied complete with remote emergency stop button and gas
pressure switch
l On board emergency stop button (that doubles as a system on/off switch)
l All connections on front panel, leaving the complete enclosure for cable entry
l Clearly-marked terminals for easy installation
l 1 additional emergency stop button can be connected directly to the PCB
INTELLIGAS 100P GAS PROVING SYSTEM
The Intelligas 100P gas proving system meets the requirements of IGE/UP/11
and it’s easy to install.
EC1000 GAS INTERLOCK
The MWA EC1000 is an interlock between the ventilation system and the gas solenoid valve. The gas solenoid valve
will not open unless the fans are on or the air ow is below set levels. Complies with all Corgi gas regulations for
commercial kitchens and provides complete compliance with BS6173.
The EC1000 comes complete with the gas interlock unit, air differential pressure switch's & tting kits for two fans and
an emergency panic button.
EC4000 GAS INTERLOCK
The MWA EC4000 gas interlock has the same features as the EC1000 gas interlock but with up to four fan connections
for the larger commercial kitchen.
GAS PROVING SYSTEM WITH VENTILATION INTERLOCK
The gas proving & fan interlock system ensures that the ventilation is on and there is no gas escaping before the gas
solenoid valve is opened. Very easy to use with an LCD display on the gas proving panel giving the operator solutions
and not just LED indications. The LCD panel tells the operator the status and what to do in the event of any failures
or problems. This gas proving system utilises a true differential pressure across the gas solenoid valve and fan failure
bypass to meet Corgi & HSE guidance.
The unit has electronic pressure measuring technology, measuring true differential pressure on both sides of the gas
solenoid valve.
GAS INTERLOCK SYSTEM
...our metering knowledge
is second to none
Leading independent metering specialists
0121 327 7771 www.mwatechnology.com
We may not be able to
perform brain surgery, but...
mwa
TECHNOLOGY