Technical data

KEY FEATURES
l Microprocessor controlled gas interlock system
l Software-driven processor ensures virtually zero
failure rate
l Supplied complete with air pressure switches;
software deals with any aps utter issues
l On board emergency stop button that doubles as
system on/off switch
l Up to 2 additional emergency stop buttons can be
connected directly to the PCB
l Fire alarm interlocks to facilitate connection to the
buildings system and an Ansuls system if required
l Auxiliary interlocks to connect gas detection
equipment or noxious gas detectors
l Remote emergency stop terminals for up to 2
emergency stops and 1 on board e stop included
INTELLIGAS EGI-1 GAS INTERLOCK SYSTEMS
The Intelligas EGI-1 interlock system Is powered by a built-in microprocessor, which gives it zero fail rate. Furthermore,
because it is software-driven, this system can be adapted to perform additional functions. Consult our team to see
how this system can be adapted for your needs.
t [phone] e [e-mail] w www.mwatechnology.com t [phone] e [e-mail] w www.mwatechnology.com
58 59
INTELLIGAS 100 SERIES GAS INTERLOCK
The MWA Series 100 is an interlock between the ventilation system and the gas solenoid valve. The gas solenoid valve
will not open unless the fans are on or the air ow is below set levels. The interlock system Complies with all Gas Safe
regulations for commercial kitchens and BS6173. The gas interlock comes complete with air differential pressure
switch's & tting kits for two fans and an emergency stop button
GAS INTERLOCK SYSTEM
KEY FEATURES
l Supplied complete with air pressure switches
l Full fan and gas valve status indication
l On board emergency stop button (that doubles as a
system on/off switch)
l Fire alarm interlock
l Up to 2 additional emergency stop buttons can be
connected directly to the PCB
l Available in airow proving and current sensing versions, also
available with integral speed controllers (KVM version)
INTELLIGAS MCS101 MULTI FUNCTIONAL CONTROLLER
The MSC101 is a microprocessor based multi services & multi function controller. It provides not only the control of
building services but also compliance with building bulletin 101 (carbon dioxide levels in classrooms).
KEY FEATURES
l Provides the user with complete control over
electric water and gas supplies.
l Automatic gas proving as standard.
l Keyswitch authorisation required for all changes
to isolated/active services.
l BB101 (carbon dioxide levels in classrooms)
compliant. Choose between either switched
detector inputs or 0 - 10v input.
l Ventilation speed control 0 - 10v output can be
appended to either the switched BB101 input or
to the 0 - 10v input.
l Completely BMS compatible.
l Fascia mounted emergency stop and emergency
stop indicated on the panel fascia. Additional
Remote emergency stop terminals are provided
KEY FEATURES
l Kit includes control panel, 2 air pressure switches,
emergency stop button, gas pressure switch and
installation instructions
l Complete Gasafe technical bulletin 130 compliant,
key switch start and BS6173 compliant
l Adjustable purge and prove time (purge 5s/10s and
prove 30s/60s)
l Automatic detection of downstream leaks and
open gas valves to prevent dangerous gas leak
situations
l System automatically purges and proves the gas
line for integrity, and gas is only made available
when full prove is carried out
l No complicated LCD display driver chips to go
wrong in the heat of a kitchen
INTELLIGAS EGIP AUTOMATIC GAS PROVING SYSTEM
The Intelligas EGIP gas proving system is easy to install, with a straightforward LED display. It’s connections are
mains rated - making wiring easier and data cabling unnecessary. This means installation is about 30% quicker
than alternative systems, saving on labour.
l Compliance with CORGI’s TB130 and BS6173 - the
system needs the manger’s keyswitch to start and
low gas pressure monitoring, even after start-up
l Low voltage: sensor outputs and interlocks are all
24v, electrically isolated supply, safer wiring and
safer for service personnel
l Fire alarm interface terminals separately indicated
on front panel fascia.
l Auxiliary interlock terminals are provided for the
connection of gas or carbon monoxide detectors.
l The system fascia can be mounted remotely from
the main wiring PCB and linked with a 6-core
alarm cable.