Datasheet

DELTA PLUS GROUP - ZAC La Peyrolière - BP 140 - 84405 Apt cedex FRANCE- Tel :[phone] - Fax :[phone]
E.mail :[e-mail] - Web : www.deltaplus.eu
5
Certifications and Standards
RÈGLEMENT (UE) 2016/425
EN397:2012 + A1:2012 Protective helmets for industry
MM: Molten metal spray
LD: Lateral deformation
-20°C +50°C: Very low temperature - -20°C / +50°C
440VAC: Electric insulation
EN50365:2002 Electrically insulating helmets for use on low voltage installations
CLASS 0: Electrically insulating helmets - Class 0
EN166:2001 Personal eye-protection - Specifications
1 AT 8 9 KN: Oculars
3 8 9 AT: Frame
EN170:2002 Ultraviolet filters
2C-1.2: echelon
GS-ET 29:2011-05 Additional requirements electric arc protection.
8-1-0: Oculars
CLASS 1: Class
CLASS 0: Light transmittance class = Class 1 : (50% ≤ VLT(D65) < 75%) / Class 0 : (VLT(D65)
≥ 75%).
8-1: Frame
USA STANDARDS
ANSI-ISEA Z87.1:2010 American National Standards Institute - Occupational and Educational
Personal Eye and Face Protection Devices
Z87+: Impact resistance
U6: Oculars
D3: Frame
ANSI-ISEA Z89.1:2014 American National Standards Institute- Industrial Head protection -
Hard Hat Types and Class Standards
TYPE Type 1: Type of impact protection : TYPE Ⅰ: Impact top of the head + Flammability
+ Penetration , TYPE Ⅰ: TYPE Ⅰ + Impact Energy Attenuation + Off-center
Penetration + Chin Strap.
CLASS Class E: Electrical protection class : Class C: Conductive: not electrically tested,
Class E: Electrical (proof-tested at 20.000V) , Class G: General (proof-tested at
2.200V).