Instructions

HD32.8 - 26 - V1.3
4.8 CALIBRATE
The Calibrate menu is reserved to Technical Support. It reports the last calibration date.
To access the Calibrate submenu, proceed as follows:
1. Press SETUP;
2. Use the arrows ▲▼◄► to select Calibrate;
3. Press ENTER;
4. You will get the following message
5. Press ENTER or ESC to return to the main menu: You cannot perform any change,
calibration is reserved to Technical Support;
6. Press SETUP to exit immediately from the main menu.
NOTE: The calibration date cannot be modified by the user.
4.9 KEY LOCK
This menu item allows to lock/unlock the instrument keyboard, when the password has been input.
See the next chapter for further details.
To access the Key lock submenu, proceed as follows:
1. Press SETUP;
2. Use the arrows ▲▼◄► to select Key lock;
3. Press ENTER;
4. You will get the following message: “Enter the password to lock the keyboard”
5. Use the arrows ▼▲ to enter the correct password;
6. Press ENTER to confirm (or ESC to cancel);
By pressing ENTER you return to the main menu and the instrument keyboard is locked: A “key”
is displayed on the upper left;