Instructions

HD32.8 - 19 - V1.3
4.2.4 Cancel auto start
Once the LOG session start and end times are set, you can inhibit the session automatic start by
using Cancel auto start.
Once you have accessed the LOGGING submenu:
1. Use the arrows ▲ ▼ to select Cancel auto start;
2. The LOG session start and end times will be displayed:
3. By pressing ▲ the following message will be displayed: “Self timer not active”;
4. Press ENTER to confirm the automatic start cancellation;
5. Press ESC to exit without cancelling the automatic start;
6. Press ESC again to exit from the submenus;
7. Or press SETUP to exit immediately from the main menu.
See the previous paragraph to set a new automatic start time after cancelling the previous one.
4.2.5 Log File Manager
This item allows managing the captured logging sessions: The instrument allows printing the files
of the captured sessions (Print selected log), cancelling the entire memory (Erase ALL logs) and
selecting the memory management mode (Select memory Type).
The instrument can store up to 64 LOG sessions, progressively numbered from 00 to 63: The
session list is arranged on 4 lines and 4 columns. If you have over 16 sessions, using the F1 function
key (Page-) you shift to the previous screen, and with the F3 key (Page+) to the next one. The
current page (0, 1, 2 or 3) and the total data pages are displayed in the upper right corner: In the
example, “0/3” means page 0 of three pages of logged data.