Instructions

HD32.8 - 14 - V1.3
4. MAIN MENU
To access the programming menu press SETUP. The setting menu will be displayed with the
following items:
0) Info
1) Logging
2) Serial
3) Reset
4) Contr.
5) Firmware
6) Time/date
7) Calibrate
8) Key lock
9) Password
If you do not press any key within 2 minutes, the instrument goes back to the main display.
Use the arrows ▲▼ ◄► and press ENTER to select an item.
To exit the selected item and return to the previous menu, press ESC.
To exit the menu and return directly to measurement, press SETUP.
4.1 INFO MENU
To access the Info menu, open the main menu using the SETUP key. Using the ▲▼ ◄► arrows,
select Info and confirm with ENTER.
The following information on the instrument will be displayed: Instrument code, firmware date and
version, serial number, instrument calibration date, user identification code.
This screen cannot be modified: The user identification code (User ID) can be set using the
DeltaLog9 software (vers. 3.0 and later).
Press ESC to return to the main menu. Press SETUP to exit the menu.