Instructions

HD32.3 - 31 - V1.4
Once you enter into the submenu LOGGING:
1. select Log File manager heading through ▲▼ arrow keys: the following submenu will be
visualized:
WBGT Index
2008/11/10 08:00:00
LOG FILE MANAGER
Print selected log
Erase ALL logs
Log time
2. to select a menu heading, use ▲ ▼ arrow keys;
3. press ENTER to confirm;
4. press ESC to go back to the menu;
5. press MENU to exit immediately from the main menu.
NOTE: you can connect a PC to the serial port RS232C of the instrument or the HD40.1 printer.
Before starting to print through the port RS232C, you must set the baud rate. To do this, select
Baud Rate heading from Serial menu (see the paragraph 5.3.1 The Baud Rate) and select the
maximum value equal to 38400 baud. For the connection to a printer, use the maximum value tol-
erated by the printer.
The communication between the instrument and the PC or between the instrument and the
printer works only if the baud rate of the instrument and the one belonging to the connected
device (computer or printer) are the same.
HD40.1