Instructions

HD32.3 - 23 - V1.4
Example of immediate printing of the PMV data, obtained using HD40.1 printer.
NOTES
========================
ISO 7730 PMV Index
========================
Reference regulation
Model HD32.3 WBGT – PMV
Firm.Ver.=01.00
Instrument model
Firm.Date=2008/12/05
Instrument firmware version
SN=12345678
Instrument firmware date
ID=0000000000000000
Instrument serial number
------------------------
Identification code
Probe ch.1 description
Type: Hot wire
Description of the probe connected to the inlet 1
Data cal.:2008/10/15
Serial N.:08109460
------------------------
Probe ch.2 description
Type: Pt100 Tg 50
Description of the probe connected to the inlet 2
Data cal.:2008/10/01
Serial N.:08109452
------------------------
Probe ch.3 description
Type: RH
Data cal.:2008/10/15
Serial N.:08109464
========================
Date=2008/11/21 15:00:00
Date and Hour
Va 0.00 m/s
Air speed
Tg 22.0 °C
Globe thermometer Temperature
Ta 22.0 °C
Wet bulb temperature
RH 39.1 %
Relative Humidity
MET 1.20
Metabolic rate
CLO 1.00
Cloth resistance
PMV 0.10
PMV – Predicted Mean Vote
PPD 5.10 %
PPD – Predicted Percentage of Dissatisfied
========================
Notes:
========================
4.1.5 Start a memorization section (Logging)
To start a Logging section, press MEM key: the key starts and stops the memorization (Logging) of
a data block that will be kept into the instrument internal memory. The frequency with which the
data are memorized is set with "Log interval" menu parameter. The memorized data between a
start and a following stop represent a measurement block.
With the memorization function on, LOG and number of logging section appears on the display; a
beep is given out during each memorization.
To finish the logging, press MEM key again.
The instrument can switch off during the logging between an acquisition and the following one: the
function is controlled by Auto_shut_off_Mode parameter. With a memorization interval less than
one minute, the instrument remains always on during the logging; with an interval of at least one
minute, it switches off between an acquisition and the following one.