Instructions

HD32.2 - 21 - V1.4
5.2.5 Log File Manager
Through this heading, it’s possible to manage the acquired log sections: the instrument allows
printing the acquired data files (Print selected log) and cancelling the whole memory (Erase ALL
logs).
The instrument can memorize up to 64 sections of LOG numbered progressively from 00 to 63: the
list of the sections is placed on 4 lines and 4 columns. If there are more than 16 sections, using
MEM key you can visualize the following screen. Downwards, at the right, is indicated the current
page (0, 1, 2 or 3) and the total number of pages with the memorized data: in the example, “0/3”
means that you must print the page 0 on the three pages with memorized data.
LOG FILE 0/3
00 – 01 – 02 – 03
04 – 05 – 06 – 07
08 – 09 – 10 – 11
12 – 13 – 14 – 15
Date:
2008/11/28 08:59:40
rec: 000039
<MEM> to charge Page
Once you enter into the submenu LOGGING:
1. select Log File manager heading through ▲▼ arrow keys: the following submenu will be
visualized:
WBGT Index
2008/11/10 08:00:00
LOG FILE MANAGER
Print selected log
Erase ALL logs
Log time
2. to select a menu heading, use ▲ ▼ arriw keys;
3. press ENTER to confirm;
4. press ESC to go back to the menu;
5. press MENU to exit immediately from the main menu.
NOTE: you can connect a PC to the serial port RS232C of the instrument or the HD40.1 printer.
Before starting to print through the port RS232C, you must set the baud rate. To do this, select
Baud Rate heading from Serial menu (see the paragraph 5.3.1 The Baud Rate) and select the
maximum value equal to 38400 baud. For the connection to a printer, use the maximum value tol-
erated by the printer.
HD40.1