Manualshelf

Instructions

ManualsBrandsDelta Ohm ManualsEnvironmental Testing EquipmentDelta Ohm HD32.2 WBGT Kit Thermometer -40 up to +100 °C
11121314151617181920
HD32.2 - 19 - V1.4
1. using ◄ ► arrow key select the data to modify (year/month/day and hour/minutes/seconds);
2. once selected, the data will start flashing;
3. change the valued with ▼▲ keys;
4. confirm pressing ENTER;
5. to be back to Logging menu without modifying anything, press ESC;
6. to be back to the main menu, press ESC again;
7. to exit directly from the main menu, press MENU.
NOTE: in a default mode, the set end acquisition time is more than 10 minutes with reference
to the start time of Logging section..
1. Once set both the values, the summary of the times will be visualized: date and hour of start and
end of LOG section.
WBGT Index
2008/11/10 08:00:00
<ENTER> confirm
Start time
2008/11/28 10:29:00
End time
2008/11/28 10:39:00
<ESC> exit/cancel
2. Press ENTER to confirm or ESC to exit without activating the automatic start: in both the cases,
you go back to LOGGING menu.
3. Press MENU to exit directly from the main menu.
When the instrument starts a LOG section in an automatic mode, a beep is given out for each
acquisition and, in the upper part of the display, LOG flashing heading will appear.
To stop the section befor the set stop time, press MEM key.
To cancel the settingf of the automatic start, use Cancel auto start function, described in the
previous paragraph.
NOTE: the automatic logging section starts also if the instrument is off. If, during the start of
automatic logging section, the instrument is off, it switches on some minutes before the start time
and, at the end of the logging, it remains on. If it’s supplyed by a battery, it switches off after some
minutes spent in no working conditions at the end of the logging section.
To set the auto-switching, see the paragraph 5.2.2.
5.2.4 Cancel auto start
Once set the start and end times of LOG section, you can avoit the auto start of the section through
Cancel auto start heading.
Once entered into LOGGING submenu:
1. select, using ▲ ▼ arrow keys, Cancel auto start heading
2. a message containing the start and end time of LOG section will be visualized: