Instructions

HD32.2 - 18 - V1.4
2. To go back to Logging menu, press ESC.
3. To go back to the main menu, press ESC again.
4. To exit directly from the menu press MENU.
5.2.3 Start/stop time – The automatic start
The start and the end of the memorization can be programmed inserting the date and the hour.
The function offers, as start hour, the current hour will increase of 5 minutes: to confirm, press
<ENTER>, vice versa set the date and the hour using the arrows. So it’s requested to set the data for
ending the memorization: in a default mode, the instrument offers the start hour increased of 10
minutes. The values offered in default mode are such to allow the user arranging the instrument for
the measurement.
NOTE: in a default mode, the set time is more than 5 minutes with reference to the current
hour.
For the setting, go on as indicated below.
Once entered into LOGGING submenu, select Start/Stop time heading using ▲ ▼ arrow keys:
“Enter start time” messagge will be visualized as indicated below:
WBGT Index
2008/11/10 08:00:00
enter start time
arrows to correct
<ENTER> confirm
default= 5m>RealTime
2008/11/28 10:29:00
1. using ◄ ► arrow key select the data to modify (year/month/day and hour/minutes/seconds);
2. once selected, the data will start flashing;
3. change the valued with ▼▲ keys;
4. confirm pressing ENTER;
5. to be back to Logging menu without modifying anything, press ESC;
6. to be back to the main menu, press ESC again;
7. to exit directly from the main menu, press MENU.
After setting the time of the memorization start, there will be visualized the request screen for
inserting the end memorization time (enter stop time):
WBGT Index
2008/11/10 08:00:00
enter stop time
arrows to correct
<ENTER> confirm
default=10m>RealTime
2008/11/28 10:39:00