Instructions

HD32.2 - 16 - V1.4
7. press ENTER to confirm and go back to the main menu;
8. or press ESC to go back to the menu, without modifying anything;
9. press MENU to exit directly from the main menu.
NOTE: With reference to the time, you can set hour and minuted, the seconds are always set at 00
(set 00 seconds!).
5.2 LOGGING MENU
Press MENU key to enter into the main menu;
• Select Logging heading using ▲ ▼ keys;
• press ENTER: the submenu for the parameters setting involving the Logging section (to
aquired) is visualized.
WBGT Index
2008/11/10 08:00:00
LOGGING MENU
Log interval
Self shut_off mode
Start/stop time
Cancel auto start
Log file manager
<ESC> exit/cancel
5.2.1 Log Interval
Through this heading, it’s possible to set the LOG interval (interval between two acquisition
following samples): to set, go on as indicated below:
enter into LOGGING submenu (previus paragraph), select Log Interval heading using ▲ ▼ arrow
keys:
WBGT Index
2008/11/10 08:00:00
LOGGING MENU
input LOG interval
as h:mm:ss (1h max)
arrows to correct
or <ESC> now set at:
0:00:15
1. Using ▲ ▼ arrow keys select the interval duration that is between a minimum of 15 seconds and
a maximum of one hour.
2. Press ENTER to confirm and go back to Logging menu.
3. To go back to Logging menu without modifying anything, press ESC.
4. To go back to the main menu, press ESC again.
5. To exit directly from the menu, press MENU.
The values that youc an set are the following ones: 15 seconds - 30 seconds - 1 minute - 2 minutes -
5 minutes- 10 minutes - 15 minutes -20 minutes - 30 minutes – 1 hour