Instructions

HD32.2 - 15 - V1.4
To modify the ID, press ENTER. Select the heading that you want to change with ◄► arrows and
modify it with ▲▼ arrows. Go on with the other headings and, at the end, confirm with ENTER
key.
Selecting Info Probe you can visualize the information involving the probes connected to the inlets:
INFO PROBE
Ch.1:Pt100Tg_50
Cal=2008/06/20
SN=08018422
Ch.2:Pt100
Cal=2008/06/21
SN=08018423
Ch.3:Pt100Tw
Cal=2008/06/20
SN=08018424
INFO ABOUT PROBE:
Description of the probe connected to the inlet 1.
Calibration data of the probe connected to the inlet 1.
Serial number of the probe connected to the inlet 1.
Description of the probe connected to the inlet 2.
Calibration data of the probe connected to the inlet 2.
Serial number of the probe connected to the inlet 2.
Description of the probe connected to the inlet 3.
Calibration data of the probe connected to the inlet 3.
Serial number of the probe connected to the inlet 3.
To go back to the main menu, press ESC. To exit from the menu, press MENU.
Time/Date allows to set the date and the hour that will appear on the upper part of the display.
To enter into Time/date, go on as indicated below:
1. using ▼▲ arrow keys, select Time/date heading
2. press ENTER
3. the messagge will be visualized
2008/11/10 08:00:00
enter date/time
<- arrows change ->
<ENTER> confirm
and set 00 seconds !
year/mm/dd hh:mm
2008/11/28 11:10:26
4. use ◄► arrows to select the data to set (year/month/day – hour : minutes)
5. once selected, the data will start flashing;
6. using ▼▲ arrows, insert the right value;