Instructions

HD2402 - 24 - V1.3
measurements with a gold background will be considered in the final evaluation re-
port.
The evaluation can be performed using several consecutive measurements, selecting
them by means of the SHIFT key on the PC keyboard (select the first measurement of
the series, then keep the SHIFT key depressed and select the last measurement of the
series), and pressing the Save icon.
If you wish to perform the evaluation keeping into consideration all the measurements
in the file, select the Select All icon and then the Save icon to save the selection in the
project.
The same file can be associated to a source more than once, so as to be able to per-
form the analysis with different geometric parameters or with a different selection of
measurements.
Selecting the Display Report icon, the evaluation report can be displayed and subse-
quently printed or exported in different formats. The various sources and logs can be
included or excluded from the report by simply selecting or deselecting the corre-
sponding boxes in the left upper panel, that displays the items of the project.
To save the project, select the Save icon on top of the project window. The geometric
parameters, all measurement data and the measurement selection for each data file
associated to the project are also saved in the project file.
To remove sources or records from the project, select them in the left upper panel
and press the right key of your mouse, then select Delete Source or Delete Measure-
ment.
Details concerning the setting of geometrical parameters and calculation of exposure
limit values requested by the L.D. 81/08 and specified in the tables in the right upper
panel are explained below.