Instructions

HD2402 - 23 - V1.3
The window is divided into five panels:
• The panel with the project components (in the upper left side), where the log
file is now present.
• The panel with the selected file information (placed below the panel of the pro-
ject components).
• The panel where the geometric parameters of the analyzed source must be en-
tered (in the lower left side).
• Right lower panel, containing the list of the logged measurements if the option
From File was selected, or the fields where the measurements detected by the
instrument are displayed, if the option From Instrument was selected.
• Right upper panel, containing the risk indexes evaluation results.
If the option From Instrument was selected as the data origin, select the Start icon
(green arrow) to start logging, the right lower panel will display measurements in real
time. To stop acquisition, select the Stop icon (red square), the right lower panel of
the project window will show the list of the acquired measurements. Measurements
are saved in a file in the Monitor folder; the file will appear among the items of the
project in the left upper panel.
The results of the evaluation that are displayed in the right upper panel refer
only to the measurements selected in the list and not to all the listed meas-
urements.
It is possible to keep memory of the selection saving it in the project, by pressing the
Save icon. After the saving, the selection will appear with a gold background. Only the