Instructions

HD2402 - 22 - V1.3
The right panel contains two additional columns: N. Measures Done (number of meas-
ures performed on the source) and N. Measures Report (number of measures used to
prepare the evaluation report). The column content is void for the moment and will be
updated afterward, when some measurements will be associated to the source.
Proceed the same way to add other sources to the project.
At this point, the detected measures can be associated to each source. Select a source
and press the right key of your mouse, then select New Measurement and after that
one of the following options:
• From File: to analyze data already logged and saved in a PC;
• From Instrument: to acquire and analyze a new series of measurements in real
time.
If the From File option has been selected, a window will appear where to search for
the log file; select the desired file and press Open.
After choosing the data origin, by selecting a measurement file associated to a source,
the following window will appear.