Instructions
- -
24
Log lasting (time set for recording)
It represents the recording duration: After this set time, the recording is ended. The recording can be
stopped earlier by pressing MEM.
To disable this function, set the time to 0:00:00. In this case the recording ends by pressing MEM or
when the memory is full.
LOGGING MENU
LOG LASTING
h:mm:ss (1h max)
00:00:00
With setting:
00:00:00 Log stop
with key MEM
▲▼ set
<ESC> exit
Use the arrows to change the set time; the maximum allowed value is 1 hour.
Confirm with ENTER.
Press ESC to exit from this menu level without making changes.
Press MENU to exit immediately from the main menu.
4.3 SERIAL MENU (SERIAL COMMUNICATION)
The Serial submenu allows setting the record printing interval (ri eral).
The LOG sessions can be downloaded on a PC, through the USB connection. The transfer speed is
fixed at 460800 bps.
After downloading the data on the PC, using the dedicated software, they will be processed by this
software for graphic display.
To access the Serial submenu, proceed as follows:
1. Press MENU on the instrument;
2. Use the arrows ▲▼ to select Serial;
3. Press ENTER;
4. You will get the Serial submenu.
COMMUNICATION MENU
SERIAL
1) Print Interval
▲▼ select
<ESC> exit/cancel
<ENTER> confirm