Instructions

- -
23
See File Log:
Selecting this item you can view the logging sessions in the instrument:
LOG FILE 0/3
00– 01– 02– 03
04– 05– 06– 07
08– 09– 10– 11
12– 13– 14– 15
START Date:
2010/02/10 08:50:40
Record: 000039
▲▼◄► select
<MEM> page change
1. Use the arrows ▲▼◄► to select the log, and the MEM key to shift page.
2. Once a file is selected, the acquisition start date and time and the number of samples contained in
the file (Rec) are displayed at the bottom of the display. The files are stored in ascending
order. Each file is only identified by the date and time, shown on the display. In the example
above, the file 00 is selected: The recording started at 08:50:40 on 10 February 2010. The file
contains 39 samples.
3. press ESC to exit this menu;
4. Press MENU to exit immediately from the main menu.
File Log Erase (erasing all memory)
By selecting this item, the “ERASE ALL LOGS SETTED FILES” message will be displayed:
MENU LOGGING MENU LOGGING
ERASE ALL LOGS ERASE ALL LOGS
SETTED FILES SETTED FILES
EMPTY MEMORY
<MEM> confirm
<Esc> exit <Esc> exit
1. Press MEM to erase all files;
2. Press ESC to cancel the operation and return to the previous menu level;
3. Press MENU to exit immediately from the main menu.