Instructions

- -
21
4.2.4 Cancel Auto-Start
Once the LOG session start and end times are set, you can inhibit the session automatic start by
using Start Log Erase.
Once you have accessed the LOGGING submenu:
1. Use the arrows ▲▼ to select Start Log Erase
2. The LOG session start and end times will be displayed:
MENU LOGGING
Auto-Start Erase
Setted start:
2010/02/10 10:29:00
Setted end:
2010/02/10 10:39:00
Press ▲▼ for
Auto-Start Erase
<ENTER> confirm
3. By pressing ▲ the following message will be displayed:
LOGGING MENU
Auto-Start
not active
<ESC> exit/cancel
<ENTER> confirm
4. Press ENTER to cancel the automatic start;
5. Press ESC to exit without cancelling the automatic start;
6. Press ESC again to exit from the submenus;
7. Or press MENU to exit immediately from the main menu.
See the previous paragraph to set a new automatic start time after cancelling the previous one.