Instructions

HD208 - 5 - V1.4

3 INSTALLATION

The case of the instrument is provided with a hole on the back to fix it to a support

(screw or hook) on the wall. Insert the head of the support in the lower part of the

hole (width 10 mm) and lower the instrument so that the head of the support remains

wedged in the upper part of the hole (width 6 mm). Make sure that the instrument

cannot accidentally come out from the support.

Alternatively, a fixed installation can be realized, using the optional HD208.13 alu-

minium flange to be fixed on the back of the instrument case.

Fixin

hole

Flan

HD208.13