Instructions

HD208 - 18 - V1.4
Temperature probes with Pt100 sensor
TP35.4… Temperature probe with Pt100 1/3 DIN 4-wire sensor. Operating tem-
perature: -50…+105 °C. Dimensions: Ø 6 x 50 mm. AISI 316 stainless
steel tube. M12 4-pole female connector.
Accessories
HD35AP-CFR21 Advanced version of the HD35AP-S software including, in addition to
the features of the basic software, the management of the data log-
ging system in accordance with the FDA 21 CFR part 11 recom-
mendations.
CP23 Direct USB connection cable with mini-USB male connector on the
instrument side and USB type A male connector on the PC side.
HD208.13 Aluminium flange for fixing the instrument to the wall.
HD35-BAT3 3.6 V non-rechargeable lithium-thionyl chloride (Li-SOCl
2
) battery,
size AA, 2-pin Molex 5264 connector.
HD75 Saturated solution for testing the Relative Humidity probes at 75%
RH, supplied with adapter for probes diameter 14 mm thread M12×1.
HD33 Saturated solution for testing the Relative Humidity probes at 33%
RH, supplied with adapter for probes diameter 14 mm thread M12×1.
HD11 Saturated solution for testing the Relative Humidity probes at 11%
RH, supplied with adapter for probes diameter 14 mm thread M12×1.
DELTA OHM metrology laboratories LAT N° 124 are ISO/IEC 17025 accredited by
ACCREDIA for Temperature, Humidity, Pressure, Photometry / Radiometry, Acous-
tics and Air Velocity. They can supply calibration certificates for the accredited
quantities.
TP35.4.
CABLE LENGTH: 3 = 3 m
,
5 = 5 m
,
10 = 10 m
/C