Data Sheet

10
TP35N1. /C
CABLE LENGTH: 3 = 3 m, 5 = 5 m, 10 = 10 m
40
5
Temperature probes with NTC10kΩ@ 25 °C sensor
TP35N1… Temperature probe with NTC10KΩ sensor. Operating temperature:
-20…+75 °C. Accuracy: ± 0.3°C in the range 0…+70°C / ± 0.4°C
outside. Dimensions: Ø5x40mm. AISI 316 stainless steel tube. M12
4-pole female connector.
TP35N2… Temperature probe with NTC10KΩ sensor. Operating temperature:
0…+75°C. Accuracy: ± 0.3°C in the range 0…+70°C / ± 0.4°C
outside. Dimensions: Ø6x50mm. AISI 316 stainless steel tube. M12
4-pole female connector.
TP35N2. /C
CABLE LENGTH: 3 = 3 m, 5 = 5 m, 10 = 10 m
TP35N5. /C
CABLE LENGTH: 3 = 3 m, 5 = 5 m
TP35N5… Penetration temperature probe with NTC10KΩ sensor. Operating
temperature:
-20…+105 °C. Accuracy: ± 0.3 °C in the range
0…+70°C / ± 0.4°C outside. Dimensions: Ø4x100mm. AISI
316 stainless steel tube. M12 4-pole female connector.
ORDERING CODES
HD208… Datalogger for temperature or temperature/relative humidity and dew
point. Optional LCD Display. Configurable measurement alarms. USB
output. Powered by 3.6V non-rechargeable lithium-thionyl chloride
internal battery (Li-SOCl
2
). Supplied with: basic software HD35AP-S,
battery, user manual. The USB cable CP23 and the external probe
with cable must be ordered separately.
HD208 . PROBE TYPE:
No letters = only internal temperature sensor
TC = only external probe with cable
TS = only external fixed temperature probe with
stainless steel tube
TV = only external fixed temperature probe with
Pocan protective cap and stainless steel grid
TCI =
external probe with cable + internal temperature sensor
QUANTITIES MEASURED:
N = temperature with NTC10kΩ sensor
7P = temperature with Pt1000 sensor
1N = temperature (NTC10kΩ sensor) and relative humidity
17P = temperature (Pt1000 sensor) and relative humidity
Options 7P and 17P (Pt1000 sensor) are possible
only with external probe with cable.
LCD:
No letters = without LCD, L = with LCD