User's Manual

6 Cisco WAP351 Quick Start Guide
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
NOTE If you need help resolving a problem, visit the Cisco Small Business
Support Community at www.cisco.com/go/smallbizsupport.
Label Activity Description
POWER
Off The Cisco WAP351 has no power.
Solid Green The Cisco WAP351 is powered on, booting, or
in normal operation with DC power supply.
Solid Blue The Cisco WAP351 is powered on, booting, or
in normal operation with PoE 802.at power
supply.
Solid Amber The Cisco WAP351 is powered on, booting, or
in normal operation with PoE 802.af power
supply.
Solid Red The Cisco WAP351 fails to boot with both
firmware images.
Flashing The Cisco WAP351 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
WLAN
Off Wireless is disabled, for both 2.4 GHz and 5
GHz.
Solid Green Wireless is enabled in concurrent mode
enabled. (The intensity needs to be the same)
Solid Amber Wireless is enabled with only 5 GHz in use.
Solid Blue Wireless is enabled with only 2.4 GHz in use.
Flashing Transmitting or receiving data.
LAN, PD,
and PSE on
back panel
Off No Ethernet link.
Solid Green GE Ethernet link is active.
Solid Amber FE Ethernet link is active.
Flashing Transmitting or receiving data.
PSE on
front
panel
Off PSE is not in use.
Solid Blue PSE is in use.
5