User's Manual

2 Cisco WAP351 Quick Start Guide
Welcome
Thank you for choosing the Cisco WAP351 Wireless-N Dual Radio Access
Point with 5 Ports Switch. The Cisco WAP351 is an indoor concurrent dual
band radio 802.11n access point with integrated PoE switch.
This guide is designed to familiarize you with the general layout of the
Cisco WAP351, describe how to deploy the Cisco WAP351 in your
network, and describe how to configure the Cisco WAP351. For additional
information, see www.cisco.com/go/300_wap_resources.
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with browser support for:
– Internet Explorer 7.0 or later
– Chrome 5.0 or later
– Firefox 3.0 or later
– Safari 3.0 or later
• Tools for installing the hardware
• One or more Ethernet network switches with PoE
Cisco WAP351 Features
Front Panel
The front panel of the Cisco WAP351 consists of three lights: Power,
WLAN, and PSE. For full descriptions of the colors of the lights and their
indications, see “Verifying the Hardware Installation”.
Back Panel
POWER—This button is used to turn the power on and off. It is not
applicable when using PoE.
48V DC—This jack is used to connect the power adapter to the Cisco
WAP351 if you are not using PoE.
RESET—See “Rebooting the Cisco WAP351 or Returning it to its
Factory Default Settings” for information on the Reset button.
1
2