User's Manual

8. RSSI calibration (linear approximation)
Linear curve fitting is performed on the result, and PDR 0x1902, 0x1905, or
0x1908 is calculated, depending on the platform type.
9. PA control loop calibration
The PA control loop behavior is measured as a function of modulation type (bit
rate) and channel (frequency). Depending on the platform, PDR 0x1901 or
0Xpdr1903 and 0x1904 are calculated.
There are two implementations for this step:
1. PA Calibration
2. PA Curves and PA limits
Besides, we have max/min output power pass/fail criteria for different
modulation as Figure2 in 9301A_param configured file.
Figure2. Power Limit