User's Manual

802.11b/g WiFi Module



Boot Selection

Slot 1, 2 There are two images of different releases in the flash. One stays at a place called Slot 1 while

another stays at Slot 2. They are non-relative with each other. You can choose one of them to

boot from.

Reboot AP You may select Slot 1 or Slot 2 to boot from that slot, and select AP or Router to boot to that

mode. Then click on “Apply” button to reboot the access point. It will boot from the Slot in the

mode from your choose; and it will always boot like this until you make different changes again.

Cancel Means you leave it un-changed.