User Manual

AT-TQ 2403 IEEE 802.11abgh, D ual Radio, Enterprise W ireless Access Point Installation Guide 11
Figure 1: Front and Back panels
LEDs
The system LEDs on the AT-TQ 2403 IEEE 802.11abgh, D ual Radio, Enterprise W ireless Access Point are
described in Table 1.
Table 1: System LEDs
LED State Description
POW ER O ff The access point is not receiving power.
Green The access point is receiving power.
TEST O ff N o system maintenance in progress.
Amber System startup or maintenance in progress.
The LAN LED s are described in Table 2.
Table 2: LAN LEDs
LED State Description
LN K/ACT (100M) O n The access point is operating at 100 Mbps.
O ff The access point is not operating at 100 Mbps.
Blinking The access point is sending or receiving data at 100 Mbps
LN K/ACT (10M) O n The access point is operating at 10 Mbps.
O ff The access point is not operating at 10 Mbps.
Blinking The access point is sending or receiving data at 10 Mbps
The W ireless LED s are described in Table 3.
Table 3: W ireless LEDs
LED State Description
LN K/ACT (W LAN a) O ff N o link is detected.
Green An 802.11a W LAN link has been made.
Blinking Green N etwork activity is occurring.
LN K/ACT (W LAN g) O ff N o link is detected.
Green An 802.11g W LAN link has been made.
Blinking Green N etwork activity is occurring.