User Manual

10 AT-TQ 2403 - IEEE 802.11abgh, D ual Radio, Enterprise W ireless Access Point - Installation Guide
Chapter 1: Overview
The AT-TQ 2403 IEEE 802.11abgh, Dual Radio, Enterprise W ireless Access Point is a wireless
communications hub for devices on your network. It provides continuous, high-speed access between your
wireless and Ethernet devices. You administer the AT-TQ 2403 IEEE 802.11abgh, D ual Radio, Enterprise
W ireless Access Point using the AT-TQ 2403 web interface configuration menu.
Features
The features of the AT-TQ 2403 IEEE 802.11abgh, D ual Radio, Enterprise W ireless Access Point include:
• High performance up to 108 Mbps data rate
• Security support via 802.11i (W PA2), W PA-PSK, TKIP, AES, IEEE 802.1x, and EAP/802.1
• Multiple BSSID and Virtual LAN (VLAN s)
• Inhibit SSID broadcast and Ignore SSID scan
• MAC Access Control for wireless interface
• Load balancing
• 802.11e (W MM only)
• W ireless D istribution System (W DS) for W ireless Bridge Mode supported
• AP clustering
• Rogue AP detection
• Transmit power control/limiting
• IEEE 802.3af Power over Ethernet (PoE) capable
• Two independent radios for concurrent 2.4 GH z and 5 GH z operations
• Antenna diversity on both 2.4GHz and 5GH z
• O ne 10/100 Fast Ethernet port with auto-negotiation, and auto MD I/MD IX , back pressure, and flow
control
Front and Back Panels
The LED s on the front panel show the power and connection status while power, LAN and antenna
connectors are on the back panel together with a reset button.