Quick Start Guide Cisco RV132W ADSL2+ Wireless-N VPN Router Package Contents • Cisco RV132W ADSL2+ Wireless-N VPN Router • Power Adapter • Ethernet Cable • This Quick Start Guide • Pointer Card • Technical Support Contact Card • Console Cable • RJ-11 Cable
Welcome Thank you for choosing the Cisco RV132W ADSL2+ Wireless-N VPN Router. The RV132W provides business class DSL connectivity for SOHO, small businesses and remote professionals. This guide describes how to physically install your Cisco RV132W and launch the web-based Device Manager. 1 Installing Cisco RV132W To prevent the device from overheating or being damaged: • Ambient Temperature—Do not operate the device in an area that exceeds an ambient temperature of 104°F (40°C).
2 Cisco RV132W Features Front Panel Power Solid green when the device is powered on and booted. Flashing green when the device is booting or loading the firmware. Solid red when the device fails to reboot, or system error, or is in firmware recovery mode. Internet Off when the device is powered off. Off when the ADSL2+/WAN LED is OFF. Solid green when the device has a DSL WAN IP or Ethernet WAN IP connection. Flashing green when the device is sending or receiving data through the DSL WAN.
VPN Off when there is no VPN tunnel defined, or all defined VPN tunnels have been disabled. Solid green when there is at least one VPN tunnel working. USB Solid amber when none of the enabled VPN tunnels are working. Off when no 3G/4G USB dongle is connected or the USB dongle is not recognized. Solid green when the 3G/4G USB dongle is recognized and currently connecting to the ISP network.
WARNING Connecting a power adapter out of spec may result in hardware damage. Side Panel The side panel of the Cisco RV132W has a Kensington lock slot. You can use it to attach a cable and lock to the Cisco RV132W.
Connecting the Cisco RV132W 3 NOTE You must connect one PC with an Ethernet cable for the purpose of the initial configuration. After you complete the initial configuration, administrative tasks can be performed using a wireless connection. STEP 1 Power off all equipment, including the cable or DSL modem, the PC, and the Cisco RV132W.
4 Using the Setup Wizard NOTE The Setup Wizard and Device Manager are supported on Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, and Apple Safari 3.0 or later. To configure the device by using the Setup Wizard: STEP 1 Power on the PC that you connected to the LAN port in Step 2 of the Connecting the Cisco RV132W section. Your PC becomes a DHCP client of the firewall and receives an IP address in the 192.168.1.xxx range. STEP 2 Start a web browser on your PC.
STEP 6 Enter the new password again to confirm. STEP 7 Click Save.
5 Where to Go From Here Support Cisco Support Community www.cisco.com/go/smallbizsupport Cisco Support and Resources www.cisco.com/go/smallbizhelp Phone Support Contacts www.cisco.com/en/US/support/ tsd_cisco_small_business _support_center_contacts.html Cisco Firmware Downloads www.cisco.com/go/smallbizfirmware Cisco Open Source Requests www.cisco.com/go/ smallbiz_opensource_request Cisco Partner Central (Partner Login Required) www.cisco.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
Americas Headquarters Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. 78-100678-01 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
