User Manual

Wireless PCI Adapter
14
Install Driver Under Windows NT
Windows NT will setup the PCI Adapter differently depending upon
whether you’ve previously installed network hardware or not. Please
follow the instructions appropriate for you.
If You Have Never Installed Network Hardware:
1. Windows NT is not a Plug-and-Play Operating System and will
not automatically identify the PCI adapter. To begin setup, select
Settings from the Start Menu and bring up the Control Panel.
Then double-click on the Network icon.
2. Windows will notify you that Networking is not installed. Click
the Ye s button to continue.
Wireless PCI Adapter
15
3. Installation will begin and you will reach the screen shown
below. Select the box that reads Wired to the network since you
are adding network hardware. Then, click the Next button to
continue.
4. The next screen will not show any Network Adapters installed
on your system, which signifies that no network hardware has
been previously installed. Click the Select from list button to
continue.