User's Manual

EasyWiFi Mounting
18120511-01 Airspan Networks Inc. 5-4
To wall mount the EasyWiFi:
1. On the wall, mark the position with a pencil where you want to drill the two
holes for the screws onto which the two EasyWiFi mounting hooks will later
by guided. The distance between the two wall-mounting hooks (from their
centers) is approxiamtely 83 mm (3.27 inches). Ensure that the holes are
aligned and level using a spirit level.
2. Drill holes for each hole that you marked in the step above using a no. 6
twist-drill bit.
3. Tap the 6-mm wall anchors (supplied) into each of the drilled holes.