User's Manual

Table Of Contents

18120511-01 Airspan Networks Inc. 1

Connecting to LAN

EasyWiFi provides four 8-pin RJ-45 ports for 10/100BaseT (Fast Ethernet) interface

with the subscriber's network. These LAN ports are located on the back panel and

labeled lan1, lan2, lan3, and lan4. The LAN ports support Half and Full duplexing

mode, Auto-Negotiation, and Auto-MDIX.

The EasyWiFi-to-computer cable setup is listed below:

 Cable: straight-through CAT 5 STP Ethernet cable

 Connector: 8-pin RJ-45 at both ends

 Connector pinouts:

Pin Function

1 Tx+

2 Tx-

3 Rx+

6 Rx-

To connect EasyWiFi LAN ports to the subscriber's Ethernet network:

1. Plug the Category 5 Ethernet cable into the desired EasyWiFi 8-pin RJ-45

port.

2. Plug the other end of the Category 5 Ethernet cable into your computer's

LAN port located at the back of your computer.