User's Manual

Using the Web-Based Advanced User Interface
49
section
1
2
3
4
5
6
7
8
9
Setting WPA (with server) Security
If your network uses a radius server to distribute keys to the clients,
use this setting.
1.
From the “Security Mode” drop-down menu, select “WPA
(with server)”.
2.
For “Encryption Technique”, select TKIP or AES. This setting will
have to be identical on the clients that you set up.
3.
Enter the IP address of the radius server into the “Radius
Server” fields.
4.
Enter the radius key into the “Radius Key” field.
5.
Enter the key interval. Key interval is how often the keys are
distributed (in packets).
6.
Click “Apply Changes” to finish. You must now set all clients to
match these settings.