User's Manual

52
Using the Web-Based Advanced User Interface
Using the Web-Based Advanced User Interface
Using 802.1x Authentication
1.
From the “Security Mode” drop-down menu, select “802.1x”.
2.
Enter the IP address of the radius server into the “Radius
Server” fields.
3.
Enter the port that the radius server is listening on.
4.
Enter the radius key into the “Radius Key” field.
5.
Enter the re-key interval. Re-key interval is how often the keys
are distributed (in seconds).
6.
Click “Apply Changes” to finish. You must now set all clients to
match these settings.