User Manual

ALTERNATE SETUP METHOD
36
Setting your Connection Type if you are a Telstra® BigPond User
[Australia Only] Your user name and password are provided to you by Telstra
BigPond. Enter this information below. Choosing your state from the drop-down
menu (6) will automatically fill in your login server IP address. If your login
server address is different than one provided here, you may manually enter the
login server IP address by placing a check in the box next to “User decide login
server manually” (4) and type in the address next to “Login Server” (5). When
you have entered all of your information, click “Apply Changes” (7). After you
apply the changes, the Internet Status indicator will read “connection OK” if
your Router is set up properly.
1. Select your State
Select your state from the drop-down menu (6). The “Login Server” box will
automatically be filled in with an IP address. If for some reason this address
does not match the address that Telstra has given you, you can manually
enter the login server address. See “User Decide Login Server Manually” (4).
2. User Name
Provided by your ISP. Type in your user name here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)