Other Content
Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
(Diagram C)
Make major adjustments by removing the spring clip and moving the pivot-rod to a different
hole in the lift-rod strap.
Step 4: Flush the Faucet
Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.
This debris can damage the sealing surfaces inside the faucet and cause leaks.
Remove aerator and black sealing gasket above it.
Before turning on the water supply, make sure the faucet handles are open (on position) in
order to remove the debris without causing damage. (Diagram A)
Open both water supply valves under the sink. (Diagram B)
Allow the water to run for 15 seconds. (Diagram C)
Close the faucet handles (turn off).
Make sure any debris is cleaned from the aerator screen. (Diagram D)
Replace the aerator. (Diagram E)
Getting a copy of your instructions
If you need a Installation Instructions / Owner's Manual for your faucet, enter your model
number under Find Support Information. Choose your faucet from the search results and select
the Installation Instructions / Owner's Manual link to view the installation sheet.
Assistance is available
If you need help while installing your Delta faucet, there are two help options available:
Call us at 1-800-345-DELTA (3358), Monday through Saturday, 7 a.m. to 9 p.m.(CST)
E-mail us any time — Responses are usually provided within 24 hours.
Read more: http://www.deltafaucet.com/customersupport/installation.html#ixzz3zAveyNzo