Other Content

ManualsBrandsDELTA FAUCET ManualsBathroom FixturesDelta Faucet RP34357RB Victorian Tub Spout with Pull-Up Diverter, Venetian Bronze

General Faucet Installation Instructions

So, you've selected or purchased the perfect new Delta® faucet for your home… now what do

you do?

Do you plan to install the faucet yourself, or would you rather rely upon the services of a

professional plumber?

For expert faucet installation, you should contact a licensed professional plumbing contractor in

your area.

However, if you're ready and eager to install your own faucet, Delta offers these helpful hints. If

you have not done this before, we suggest that you read the general faucet installation tips below.

For instructions on installing your specific faucet, please follow the Maintenance and Installation

instructions that were provided with your faucet.

Items You'll Need for Installation:

 Basin wrench

 Adjustable wrench

 Silicone sealant — Plumber's Putty is not generally recommended

 Plumber tape

 Channel locks

 Screwdriver (Phillips and slotted)

 Flashlight

Other Tools That May Come In Handy:

 Tube cutter

 Sandpaper (fine grade)

 Tape measure

How To Videos

 How to install a Pilar Faucet

 Installing a kitchen faucet

 Installing a bathroom faucet

Step 1: Position the Faucet

Summary of content (4 pages)

PAGE 1
General Faucet Installation Instructions So, you've selected or purchased the perfect new Delta® faucet for your home… now what do you do? Do you plan to install the faucet yourself, or would you rather rely upon the services of a professional plumber? For expert faucet installation, you should contact a licensed professional plumbing contractor in your area. However, if you're ready and eager to install your own faucet, Delta offers these helpful hints.
PAGE 2
    Begin installing your faucet by placing the gasket and faucet in position on the sink. (Diagram A) From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up. (Diagram B) From the top of the sink, check the faucet and gasket position. (Diagram C) From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.
PAGE 3
  Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod. (Diagram C) Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap. Step 4: Flush the Faucet          Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes. This debris can damage the sealing surfaces inside the faucet and cause leaks. Remove aerator and black sealing gasket above it.
PAGE 4
Troubleshoot your Faucet Troubleshoot by Faucet Type Select your faucet type below and we'll show you a troubleshooting diagram. You'll find a solution and recommended replacement parts. 1. Step 1: Determine What's Wrong and Find Out What Parts You May Need o o Choose your product type under Troubleshoot by Faucet Type to the left. Follow the directions for troubleshooting your product and note the replacement parts indicated. 2.