Installation manual

EN
7Operation and installation manual SOLIVIA Gateway M1 G2
• Please check the SOLIVIA solar inverter manual for instructions on how to select
the inverter ID.
• The gateway must have an AC power outlet within 2 meters of the gateway.
NOTICE
Please make sure, that DHCP is activated at your router, so that the IP address of
your gateway is automatically found. If DHCP is disabled at your router the gateway
uses the default IP conguration. For further information, please refer to Chapter 10.3
6 Connector Positions
GW
STATUS
RESET RS485
EXT. CONTROL
1 2 3 4 5 6 7 8 A B
LAN INPUT
5V
CONNECTOR NAME DESCRIPTION
RESET For detailed information, please refer to Chapter 7.8
RS485
Connection of your SOLIVIA inverter with the
SOLIVIA gateway.
EXT. CONTROL
Ripple control receivers control the power management (power
limitation) and the power factor (cos ϕ).
LAN
Connection of your SOLIVIA gateway with an internet connected
network point.
INPUT 5V Gateway power supply connector.
Status LED