Installation manual

11. Saving and Loading Data and Settings
Operation and Installation Manual for SOLIVIA 2.0/2.5/3.0/3.3/3.6/5.0 EU G4 TR
68
11.7 Creating Reports
The reports contain the following information:
● Firmware/serial number of the model
● Statistics, events, comparisons with a summary of statistics
and events
● Internal logs
● AT reports
● LVD reports (only for DE LVD and DK LVD grids)
➔
USB features
Options
Install settings
-------------------
Production info
SOLIVIA ##
1. In the main menu, press the buttons to select USB
features and then press the
button.
→ A note on IP65 protection is then displayed.
protection.
will lose the IP65
Without cover, you
2. Press the button to conrm.
→ The 300 USB features menu is then displayed.
➔
Save settings
Save swap data
Firmware update
Create reports
Load settings
300 USB features
3. Press the buttons to select Create Reports and
then press the
button.
→ The data is saved in a "SWAP_###.CFG" le on the
USB drive. The ### characters represent the RS485
ID of the solar inverter from which the data is to be
loaded, for example "001".
NOTE: If the message Pendrive
error is displayed, make sure the
USB drive is properly inserted.
Press ENTER
Successful
Create reports
4. Press the button to conrm.
11.8 Service
This function is used for servicing purposes. You will be contacted
by the Delta Support Team when this function must be used.