Installation manual
65
Operation and Installation Manual for SOLIVIA 2.0/2.5/3.0/3.3/3.6/5.0 EU G4 TR
11. Saving and Loading Data and Settings
EN
11.4 Saving Settings
The solar inverter settings can be saved to be loaded to another
solar inverter of the same type for use with the same settings.
The saved settings are:
● Grid settings
● User settings
● Display settings
● Production settings
➔
USB features
Options
Install settings
-------------------
Production info
SOLIVIA ##
1. In the main menu, press the buttons to select USB
features and then press the
button.
→ A note on IP65 protection is then displayed.
protection.
will lose the IP65
Without cover, you
2. Press the button to conrm.
→ The 300 USB features menu is then displayed.
➔
Save settings
Save swap data
Firmware update
-------------------
Create reports
300 USB features
3. Press the buttons to select Save Settings and
then press the
button.
→ The data is saved in a "STUP_###.CFG" le on the
USB drive. The ### characters represent the RS485
ID of the solar inverter from which the data is to be
loaded, for example "001".
NOTE: If the message Pendrive
error is displayed, make sure the
USB drive is properly inserted.
Press ENTER
Successful
Save data
4. Press the button to conrm.