Installation manual

ManualsBrandsDelta Energy Systems ManualsConsumer electronicsSolivia 3.3 EU G4 TR

10. Settings

Operation and Installation Manual for SOLIVIA 2.0/2.5/3.0/3.3/3.6/5.0 EU G4 TR

10.14 Standard menu

Menu 800 Standard Menu

Description

A standard menu can be dened, which is automatically displayed

when the display buttons are not used for a certain period of time.

When the standard menu is displayed, pressing the

ESC

button dis-

plays the main menu.

The standard menu is set at the factory to 411 Current Overview.

This menu shows the current data and current operating messages.

The number must be a valid menu number.

See “16.2 Overview of Menu Structure”, p. 83 for an overview of

all available menu numbers.

Accessing the Menu

Main Menu > Standard Menu

➔

Production info

Diagnostic&Alarm

Inverter info

Standard menu

-------------------

SOLIVIA ##

1. In the main menu, press

the

buttons to select

Standard Menu and then

press the

button.

→ The menu number of

the current standard

menu is displayed.

➔

411 Current overview

Menu number: 411

800 Standard menu

2. Press the button.

➔

411 Current overview

Menu number: 411

800 Standard menu

➔

Menu number: 411

→ The rst number and

the menu name ash.

➔

110 Date and time

Menu number: 110

800 Standard menu

➔

Menu number: 110

3. Press the buttons

to set the rst digit of the

menu number.

→ The menu name is

automatically changed

to match the current

selection.

➔

130 Grid selection

Menu number: 130

800 Standard menu

➔

Menu number: 130

4. Press the button and

then set the second digit of

the menu number with the

buttons.

➔

131 View grid setup

Menu number: 131

800 Standard menu

➔

Menu number: 131

5. Press the button and

then set the third digit of

the menu number with the

buttons.

6. Press the button to

nish.

CongurableParameters

Display Text Designation Description

Menu number

Menu number Any valid menu number.

10.15 Changing Grid

ATTENTION

If the selected grid is changed, a completely new

commissioning process is started, see “8 Com-

missioning”, p. 34.

► Always contact the Delta Support Team

before changing the selected grid. You can

nd contact information on the back of this

manual.

After completion of initial commissioning, the congured grid can be

changed using a PIN. Each time you wish to select a new grid or

change the protected settings for the current grid, you will need a

new PIN. You can obtain this PIN from Delta Support.

Requesting PIN from Delta Support

You must provide a key in order to receive a PIN. You will nd the

key in the 132 Grid Change menu.

1. To display the key, navigate to Main Menu > Install Settings

> Grid Selection> Grid Change.

132 Grid Change

Key:

PIN: ____

Grid: DE LVD

###########

2. Contact the Delta Support Team with the key to receive the

four-digit PIN.

Entering PIN

1. After receiving the PIN, go back to the 132 Grid Change

menu.

2. Press the

button to enter the PIN.

→ The rst digit of the PIN will begin ashing.

3. Use the

buttons to set the rst digit of the PIN. Next,

press the

button to move to the next digit.

→ After entering the full PIN, the word Conrm will start

ashing.

132 Grid Change

Grid:

Key:

PIN: 1234

##########

Confirm

DE LVD

4. Press the button to conrm.

→ The Installation menu is displayed.

Installation

-----------

Language:

continue

German

--------

5. Start commissioning the solar inverter, see “8 Commissioning”,

p. 34.