Installation manual
88
Decommissioning
10. Decommissioning
Decommissioning Procedure
If it is necessary to put the SOLIVIA 15 TL / 20 TL out of operation for return or maintenance,
please follow the instructions below:
WARNING
Deathandseriousinjurymayoccur.
To avoid injuries, please follow the below procedures:
1. Switch off AC circuit breaker to disconnect with electrical grid.
2. Switch off the DC Disconnect switch to disconnect with DC power
input.
3. Use the proper voltage meter to conrm that the AC and DC power
connections are void of any current.
4. Remove the AC wiring immediately to completely disconnect with
electrical grid.
5. Remove the DC wiring to disconnect with PV array.
6. Remove the Communication module RS485 with the computer con-
nection.
7. After nishing all the procedures, you can remove the SOLIVIA 15 TL /
20 TL from the mounting bracket.